Wet pan mill is the best equipment to replace ball mill. because it have small investment, high output, low production cost, good efficiency and easy installation. And the machine is the ideal beneficiation equipment for small and medium-sized enterprise. Wet pan mill is mainly used to process the gold, silver, lead, zinc, iron, molybdenum, copper, antimony. The wet pan mill is named by the diameter of roller. Φ1300,Φ 1350,Φ 1400,Φ 1500,Φ 1600 is suitable for selection of iron ore, molybdenum ore ,lead ore ,zinc ore, antimony ore and so on. Φ 850, Φ 900, Φ 1000,Φ 1100,Φ 1200 is suitable for selection of gold ore. Above all, 1200a type is the most popular and widely use.
When the wet pan mill start to work,the reduction box would be driven by the motor, then under the drive of reduction box, the torque is transmitted to the upper cross axle through the large vertical shaft and then to the runner wheels through the straining beams installed on both ends of the cross axle. The runner wheels are driven to rotate anti clockwise along the horizontal direction of the cross axle. When the runner wheels are working, they could not only revolve around the large vertical shaft of the wet pan mill, but also revolve their own axles. The grinding base stays fixed at the same time. The added mineral materials are thoroughly crushed and ground under the force of the runner wheels’ body weight, the huge friction force between the runner wheels and grinding base which is produced by the runner wheels’ revolution and auto-rotation, as well as the repeated squeeze, curlating, and grinding.